best way to drain uneven floors

  • An uneven shower floor can prevent proper draining, and dips in the flooring can cause puddling or potential wicking hazards. This article explains the simple steps you can take ... Premixed mortar will also be the quickest, hassle-free route to leveling your shower floor. Thinset mortar is the best choice for your ... If you've applied enough mortar to raise the level of your flooring, your drain may be sunken down in comparison to your floor. This is easily aided by using a drain extension& ...


  • If you need to level the floor more use floor leveler let it set up then drag drainage grooves towards the drain. Using a screwdriver will be the best width. Thicker would be better but it will mess up the surrounding concrete. You will want to remove the old floor drain set it at the height you want the new concrete to be. Once the concrete sets up you can drill or cut some notches where you put the drain grooves. Doing it any other way may cause you to fill your drain with& ...


  • Quite often, calling a contractors for slab foundation repair service is the best solution for dealing with uneven floors and other issues related to foundations. ... While it's a poor way of determining exactly how bad your foundation problems is, it will quickly allow you to find out if your floors are uneven. ... The only sure way to know exactly how uneven your floors are is to contact a foundation repair contractor like HD Foundations and have them stop by to evaluate your property.


  • Subscribe Now: www.youtube.com/subscription_center?add_user=ehowatHomeChannel Watch More: www.youtube.com/ehowatHomeChannel Just because a surf...


  • Floor Plate Installation. When a floor is uneven, the best way to frame a new wall is to set the floor and ceiling plates first. Use a chalk line on the floor to indicate wall placement, and cut a 2-by-4 to fit. Attach the board, which serves as the floor plate, with 16d nails, two per floor joist, evenly spaced. If the wall is running parallel to the joists, insert the two nails through the board and into the subfloor every 12 to 16 inches.


  • It goes without saying that you should try not to splash water around, but this should go into the sink, and not onto the floor. That leaves three common sources: 1) Shower, 2) Washing machine and possibly 3) clothes drying. Regarding the washing machine if you don't have it already, please get a hose so that you can redirect the spill water into the toilet bowl, sink or closer to the drain. If possible avoid clothes drying in the bathroom, or ensure that there is good& ...


  • Unfortunately, even the best-poured concrete slab may retain high and low points across its surface. These high and low points can prove ... it difficult to lay tiles, carpeting or floorboards. Leveling the floor can fix the problem, removing the uneven area and leaving you with a smooth, level surface that's suitable for any floor covering material you may desire to install. ... Cover floor drains with a plastic pipe the same diameter of the drain, about ½-inch high. Pour the mixed self-leveling& ...


  • The leveler will drain through an opening as small as a nail hole, so be thorough. A good choice for filling those holes and cracks is the type of caulk that goes on white but turns clear when it dries because you can tell when it done setting up. Taping over the caulk isn't required but it's a terrific way to avoid stepping in a glob and tracking it around the rest of the house. When working on an older house with floor planks instead of plywood, cover the whole floor in self-adhering roofing& ...


  • Leveling a concrete floor takes lots of prep work and if not done right can be incredibly expensive to repair. If your finished product is either tile or the concrete floor itself, the concrete will have to be more or less perfectly even and smoot...


  • Full episode: www.youtube.com/watch?v=VRf425t9gYA This Old House general contractor tom Silva shows how to resurface an uneven concrete slab. (See be...


  • Fine options for unlevel basement floor festool owners group. ... Most people i had something similar in my basement a drain the middle of floor, and want to level concrete but on one end it slants have used ardex k 15 floors. ... Concrete how can i level my basement floor, which has a 4 inch dip do concrete floor with 1' dip? Home what is the best way to an uneven floor? Diy. Step 1 clean the floor. Its very uneven and slopes toward one corner of i also have a cement& ...


  • By putting in new plywood, you can effectively create a new, perfectly smooth surface to install your flooring on. This method is easiest if you are dealing with a wood subfloor, but it can be done on top of concrete if need be. If you have a large difference from one area of the floor to the other, you could find the appropriate thickness of plywood and install it over the top of the lower portion of the floor. This will allow the two areas of the floor to meet up at the same height. If you are dealing& ...


  • Assessing the Subfloor. First, assess the severity of the uneven subfloor. If you have a concrete floor, you must use a self-leveling compound to level the floor out. If you have a wood floor, you can follow the same process. However, if the wooden floor is severely uneven, you should consider installing plywood over the top of the floor to create a smooth, level surface. Decide which leveling method suits your needs, and follow the directions for your chosen process below.


  • In ripping up the carpet, some of the old brittle vinyl tile broke off, so the floor surface is slightly uneven. But given the asbestos, I do not want ... We only intend to have the tile go to the "black line" in the laundry area (roughly lined up from the vacuum/floor drain along the edge of the floormat to the bin with the blue top). Sorry that the floormats in front of .... So what I am asking for is other ways to deal with this, even if they're not the best way. Heck, there was carpet down& ...


  • I'm starting to look at houses, and a number of them have bedrooms or offices on the ground level with very uneven floors, generally sloping severely from one side to the other. Though they have .... (Unless it is sloping toward a drain or something.) I would check the .... or erosion issues? There's certainly ways to mitigate settlement issues, but they can get very expensive, very quickly, to the point where it might erase any of the savings from buying the cheaper house.


  • DRIcore Subfloor has a patented moisture barrier that protects finished flooring from dampness by allowing your concrete to breathe, reducing the potential for mold and mildew.


  • Concrete floors that are uneven are dangerous, and should be repaired. Re-level your concrete floor properly with help from a licensed engineering contractor...


  • Over time, the wobbling of a toilet bowl will damage the wax ring sealing the toilet drain to the drain flange attached to the bathroom floor. This will cause wastewater to leak and saturate the ...


  • During rainstorms the patio collects some water thereby forming puddles since there is not a good slope to allow for drainage. I thought it .... The simple way to improve drainage would be to rent a diamond-blade etcher from your local tool Rental and lower the outside lip off your concrete patio to promote outflow. This would ..... The mortar used to attach your tile will buffer the uneven floor ... allowing you to install tile with a slight slope away from the building. Finally& ...